ClearOne IMPRESS IM100 Manuel d'utilisateur télécharger pdf (Page 17)

USER ManUal 15

InStallatIOn MEnU

The installation menu provides controls for updating the player unit’s software (see next section)

and restoring either of the two pre-installed demonstration projects.

SyStEM MEnU

The System menu allows you to turn off or restart the IMPRESS player. When possible, always use

one of these options rather than holding in the power switch to shut the player off.

UPDATING THE UNIT’S SOFTWARE

Occasionally, ClearOne will issue upgrades to the IMPRESS software. These upgrades are issued

on the ClearOne website. Use the either of the following procedures to update your IMPRESS.

UPDatE PROCEDURE

There are two methods for updating the IMPRESS software: USB Memory Stick and Online:

USB Memory Stick Update

This method requires a USB memory stick containing the update provided by ClearOne. Contact

ClearOne support for more information.

After you have obtained the update, press the Menu key on the control keypad to display the

IMPRESS menu. Use the arrow keys to highlight the Installation button and press the Select key.

To update from a USB memory stick you will use the same “Update From CD” control in the menu.

» NOTE: There isn’t a CD-ROM on the IMPRESS unit but the control operation is the

same.

Insert the USB Memory stick into USB connector on the face of the IMPRESS unit and press the

Update from CD button.

This procedure will take approximately 60 to 90 seconds – afterwards, the application will be

restarted.

When the IMPRESS has completed its restart, press the Menu key to verify that the new version was

installed successfully.

Online Update

The IMPRESS can also be updated using an online remote update application which pushes the

updates out to the IMPRESS unit. Contact ClearOne support for more information..

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 82 83

Pas de commentaire

ClearOne IMPRESS IM100 Manuel d'utilisateur Page 17